Does this mean I can not have the PCB's reproduced and supply them to others at cost price?crobol escribió:Read the Creative Commons License. ThanksNye escribió:viewtopic.php?p=49845#p49845
Follow this link and .......
Hoops
Moderador: XRStaff
Does this mean I can not have the PCB's reproduced and supply them to others at cost price?crobol escribió:Read the Creative Commons License. ThanksNye escribió:viewtopic.php?p=49845#p49845
Follow this link and .......
The Firmware is Read protected so it will not pass the verifying process.Q: ¿es normal que si le das al botón del winpic800 "verificar todo" salga un error de verificación casi al final de la comprobación?
A: Sí, porque el firmware viene compilado de forma que protege al PIC contra la lectura del mismo. De todas formas, el WinPIC800 va verificando según programa, así que no debería suponer un problema.
Thanks Nye - REALLY appreciate your help..!!Nye escribió:Not my piece of cake, but I saw that the other day:
The Firmware is Read protected so it will not pass the verifying process.
Hi Crobol..crobol escribió:Hi Hoopster, If you have success with this Display you can try to build your own game controller and you do not need LeoBodnar any more...
viewtopic.php?f=45&t=5696&start=0
It all depends on your OS/system configuration.KiwiRacer escribió:Hi All
I also are having the above issue when programming the pic in says it has completyed the job but will not verify, ok hex may be protected as i read above but when inserted in xr dispaly & pluged into pc it say unrecognized ubs device.
Any help would be great.
Hi KiwiRacerKiwiRacer escribió:Hi All
I also are having the above issue when programming the pic in says it has completyed the job but will not verify, ok hex may be protected as i read above but when inserted in xr dispaly & pluged into pc it say unrecognized ubs device.
Any help would be great.
I have no idea if data can be send to the Display with a wireless system, but you must also put electric power on the display and maybe batteries are not enough. It works with 5V but I don't how many A are needed.fab24 escribió:....could it be possible to add to your board a transmitter/receiver to get the board working without the usb cable ?
This schematic is wrong. They must be linked by the cathodes... (as the Led segments of the displays).fab24 escribió:looking at the schemes by Calvorota it looks like all anods of the rev leds are linked and connected to C5
http://www.postimage.org/image.php?v=aV1ayTwi
We dont sell de displayCrobol escribió:Sorry but we don't buy this display.