ENGLISH FORUM. Type here your Questions
Moderador: XRStaff
ENGLISH FORUM. Type here your Questions
Hello to all
I have come across this awsome XR Display_v2 usb using Pic18f microchip I have found a circuit diagram of the project. But i have been unable to locate the hex file for the Pic18 chip, PD Display_v2 software & if possible pcb diagrams. If any body here can help with the Pic hex or software i would be greatful.
If someone could post a link or even email me the info. Email: paulbwatson@slingshot.co.nz
Thank you in advance.
Can anyone confirm XR Display V2 is using Visualizador.dll for rfactor data output.
I have come across this awsome XR Display_v2 usb using Pic18f microchip I have found a circuit diagram of the project. But i have been unable to locate the hex file for the Pic18 chip, PD Display_v2 software & if possible pcb diagrams. If any body here can help with the Pic hex or software i would be greatful.
If someone could post a link or even email me the info. Email: paulbwatson@slingshot.co.nz
Thank you in advance.
Can anyone confirm XR Display V2 is using Visualizador.dll for rfactor data output.
Re: XR Display - Questions in English
Thank you for the reply i will be waiting for the files. Fantastic job by all concerned & thank you for making the files available to all.
Re: Desarrollo Display XR SimRacing (DIY)
Hi to all!
I simply couldn't believe my eyes when I saw a video showing of functions and options of this display. There is nothing near as good as yours (believe me, i searched intire internet ). My question is, can I buy one from you and how much €
I'm in the process of building F1 wheel, Ferrari style. It was intended to use SLI-M but this is way better.
This is may WIP steering wheel.
[img]http://www.imagesforme.com/out.php/t583 ... racers.jpg[/img]
Thank you
I simply couldn't believe my eyes when I saw a video showing of functions and options of this display. There is nothing near as good as yours (believe me, i searched intire internet ). My question is, can I buy one from you and how much €
I'm in the process of building F1 wheel, Ferrari style. It was intended to use SLI-M but this is way better.
This is may WIP steering wheel.
[img]http://www.imagesforme.com/out.php/t583 ... racers.jpg[/img]
Thank you
Re: Desarrollo Display XR SimRacing (DIY)
Hola gente.
I'm Alex from Italy and I'm 38 years.
I found your forum by chance, and... woooow I' love your XR Display project... amazing.
Can I buy one of this ?Are the firmware and component included?
Thx
Alex
I'm Alex from Italy and I'm 38 years.
I found your forum by chance, and... woooow I' love your XR Display project... amazing.
Can I buy one of this ?Are the firmware and component included?
Thx
Alex
- crobol
- Maestro al volante
- Mensajes: 13867
- Registrado: 28 Abr 2007 00:00
- Volante: DFP
- Ubicación: BCN
- Contactar:
Re: Desarrollo Display XR SimRacing (DIY)
Nye escribió:There's not the chance to have the industrial PCB via this forums anymore.
But you can allways do it by yourself... order the industrial PCB or even DIY. All the necessary infos are here: viewtopic.php?f=45&t=5238
Re: Desarrollo Display XR SimRacing (DIY)
Ah ok, thanks for the reply Crobol... DIY i'd like it.crobol escribió:Nye escribió:There's not the chance to have the industrial PCB via this forums anymore.
But you can allways do it by yourself... order the industrial PCB or even DIY. All the necessary infos are here: viewtopic.php?f=45&t=5238
Well, i visited the link (viewtopic.php?f=45&t=5238) and I downloaded everything, gerber file, programmer instruction, Proyecto Casero (DIY), etc... but I haven't found the firmware to program the PIC.
Is it available? or not yet?
Gracias tanto
- Nye
- Primera conducción sin ayudas
- Mensajes: 398
- Registrado: 16 Dic 2008 01:00
- Volante: G25
- Ubicación: Sabadell
- Contactar:
Re: Desarrollo Display XR SimRacing (DIY)
It will be available soon as far as I know.
But it's not yet available.
Greetz
But it's not yet available.
Greetz
- crobol
- Maestro al volante
- Mensajes: 13867
- Registrado: 28 Abr 2007 00:00
- Volante: DFP
- Ubicación: BCN
- Contactar:
Re: Desarrollo Display XR SimRacing (DIY)
Yep, all documentation will be published as soon as it will be finished.
I know, seems a stupid phrase.
Please, be patient.
I know, seems a stupid phrase.
Please, be patient.
- crobol
- Maestro al volante
- Mensajes: 13867
- Registrado: 28 Abr 2007 00:00
- Volante: DFP
- Ubicación: BCN
- Contactar:
DisplayXR - English Forum. Type here your posts.
This Thread is for non Spanish speakers who wants or needs information about build himself the DisplayXR.
Welcome at XtremeRacers.
Welcome at XtremeRacers.
Re: DisplayXR - English Forum. Type here your posts.
Hi All
I would like to build the control plate this weekend & would like verify if the track in the box i have
marked should be joined to earth.
Thank you
Awsome work by all can't wait to build the diy Display XR
I would like to build the control plate this weekend & would like verify if the track in the box i have
marked should be joined to earth.
Thank you
Awsome work by all can't wait to build the diy Display XR
Re: DisplayXR - English Forum. Type here your posts.
Hi all,
I'm new here. I'm french, so I speak very bad spanish (and english too ).
I'm very interested by the diy project.
Kiwi: I think it's not connected to the GND. I saw in the Calvorota schematics the pin 12 of the two 74hc595 are connected together and only to the pic.
I'm new here. I'm french, so I speak very bad spanish (and english too ).
I'm very interested by the diy project.
Kiwi: I think it's not connected to the GND. I saw in the Calvorota schematics the pin 12 of the two 74hc595 are connected together and only to the pic.
- calvorota
- Calentando neumaticos
- Mensajes: 161
- Registrado: 29 Ene 2009 01:00
- Volante: Mod G-25 + volante XR F1
- Ubicación: Sevilla
- Contactar:
Re: DisplayXR - English Forum. Type here your posts.
Hi Kiwi,KiwiRacer escribió:Hi All
I would like to build the control plate this weekend & would like verify if the track in the box i have
marked should be joined to earth.
Thank you
Awsome work by all can't wait to build the diy Display XR
You're right... pin showed shouldn't be connected to ground. It's an image export fault (didn't noticed). Here you have the corrected file (please, Crobol... update the download link).
Save image and print (300dpi resolution).
- crobol
- Maestro al volante
- Mensajes: 13867
- Registrado: 28 Abr 2007 00:00
- Volante: DFP
- Ubicación: BCN
- Contactar:
Re: DisplayXR - English Forum. Type here your posts.
"Running" o sea Marchando....Calvorota escribió:(please, Crobol... update the download link).
I will replace this picture on the RAR file and change the download link.
Re: DisplayXR - English Forum. Type here your posts.
Hi everyone!
I'm rbalint Hungary (Veszprem)
Sorry, do not speak English, write to google translator.
Interested in the XR Display project, because it seems cool. As I speak is not English, not Spanish, it is difficult enough to navigate the board. I find many dead links, reading, and I can not read at home that can be adjusted so that the display XR. I do not understand, I know that this home-programmed (plugin?) XR, the display to work in rFactor, GTR ...... If the parts could be obtained, have a go, but the programmer software does not find a dead link. Can this help in the preparation or being in the home preparation of chance?
Thank you for your help!
I'm rbalint Hungary (Veszprem)
Sorry, do not speak English, write to google translator.
Interested in the XR Display project, because it seems cool. As I speak is not English, not Spanish, it is difficult enough to navigate the board. I find many dead links, reading, and I can not read at home that can be adjusted so that the display XR. I do not understand, I know that this home-programmed (plugin?) XR, the display to work in rFactor, GTR ...... If the parts could be obtained, have a go, but the programmer software does not find a dead link. Can this help in the preparation or being in the home preparation of chance?
Thank you for your help!
- Nye
- Primera conducción sin ayudas
- Mensajes: 398
- Registrado: 16 Dic 2008 01:00
- Volante: G25
- Ubicación: Sabadell
- Contactar:
Re: DisplayXR - English Forum. Type here your posts.
Hi there rbalint
It is very difficult to understand a google translation.
If you find someone who is able to translate from your mother tongue to English, life will be much easier for us ;)
Everything you need to build your own display XR have been already made public.
There's no information in English yet, but there's the will to translate the most important things.
In the meantime, if you need help, post here and we'll try to help you out.
It is very difficult to understand a google translation.
If you find someone who is able to translate from your mother tongue to English, life will be much easier for us ;)
Everything you need to build your own display XR have been already made public.
There's no information in English yet, but there's the will to translate the most important things.
In the meantime, if you need help, post here and we'll try to help you out.
Re: DisplayXR - English Forum. Type here your posts.
Hi
I have looked for the hex file to program my own PIC but unable to find anything..??
Can someone give me a link as to where this can be downloaded?
thanks
Hoops
I have looked for the hex file to program my own PIC but unable to find anything..??
Can someone give me a link as to where this can be downloaded?
thanks
Hoops
Re: DisplayXR - English Forum. Type here your posts.
Thanks Nye..!!
If I can be any help when it comes to writing the English instructions to building this, please let me know - I would VERY happy to help..!!
Is it possible to buy just a blank "industrial" type PCB only? I contacted one person from here who bought multiple boards, but they would not ship to Australia..
Anyway, thank you for your help..
Hoops
If I can be any help when it comes to writing the English instructions to building this, please let me know - I would VERY happy to help..!!
Is it possible to buy just a blank "industrial" type PCB only? I contacted one person from here who bought multiple boards, but they would not ship to Australia..
Anyway, thank you for your help..
Hoops
- crobol
- Maestro al volante
- Mensajes: 13867
- Registrado: 28 Abr 2007 00:00
- Volante: DFP
- Ubicación: BCN
- Contactar:
Re: DisplayXR - English Forum. Type here your posts.
Hi. We don't have more industrial PCB and we have no intention to make more on a future. Sorry.hoopstar escribió:Is it possible to buy just a blank "industrial" type PCB only?
But, you can use the GERBERS to do your own industrial PCB contacting a seller in Australasia.
Another option is to use the DIY "photolits" to "insolate" this PCB at home.
I'm not sure about the English translation of some "words"...
Good Luck
...and thanks by your offer to translate the next manual. We must to finish it before...
- Nye
- Primera conducción sin ayudas
- Mensajes: 398
- Registrado: 16 Dic 2008 01:00
- Volante: G25
- Ubicación: Sabadell
- Contactar:
Re: DisplayXR - English Forum. Type here your posts.
There's the will to translate the most important parts to English, but there's still nothing in the works AFAIK. So if you want to help, even if it's just a little piece I bet you'll be more than welcome
About the industrial PCB and shipping to Aussie land... I bet it's easier to find someone there that can build industrial PCBs. You already have the needed Gerber files as they were made public some time ago.
Joan Pey AKA Nye
About the industrial PCB and shipping to Aussie land... I bet it's easier to find someone there that can build industrial PCBs. You already have the needed Gerber files as they were made public some time ago.
Joan Pey AKA Nye
Re: DisplayXR - English Forum. Type here your posts.
Hi!
I have been looking at your excellent Display XR and I am going to build one. First I am going to translate all of the information to English, I will post it here when I am done and I hope this helps people
I am having difficulty getting a PCB made from the Gerber files here in England, is anybody able to sell me a PCB (made from Gerber or calvorota DIY) I am willing to pay of course. I would also like to buy a programmed PIC as I do not have a programmer
Thank you
Lee
Hola!
He estado buscando a su excelente Display XR y voy a construir una. En primer lugar voy a traducir toda la información al Inglés, lo publicaremos aquí cuando estoy haciendo y espero que esta ayuda a la gente
Tengo dificultades para conseguir un hecho de la JCP archivos Gerber aquí en Inglaterra, nadie es capaz de venderme una PCB (hecho de Gerber o calvorota DIY) Estoy dispuesto a pagar por supuesto. También me gustaría comprar un PIC programado como no tengo un programador
Gracias
Lee
I have been looking at your excellent Display XR and I am going to build one. First I am going to translate all of the information to English, I will post it here when I am done and I hope this helps people
I am having difficulty getting a PCB made from the Gerber files here in England, is anybody able to sell me a PCB (made from Gerber or calvorota DIY) I am willing to pay of course. I would also like to buy a programmed PIC as I do not have a programmer
Thank you
Lee
Hola!
He estado buscando a su excelente Display XR y voy a construir una. En primer lugar voy a traducir toda la información al Inglés, lo publicaremos aquí cuando estoy haciendo y espero que esta ayuda a la gente
Tengo dificultades para conseguir un hecho de la JCP archivos Gerber aquí en Inglaterra, nadie es capaz de venderme una PCB (hecho de Gerber o calvorota DIY) Estoy dispuesto a pagar por supuesto. También me gustaría comprar un PIC programado como no tengo un programador
Gracias
Lee
Re: DisplayXR - English Forum. Type here your posts.
Hi L33
I may look into doing a run of PCB's if we can get enough interest (and assuming it is OK with the XR team..)
I have searched for the gerber files, but haven't found them as yet - once I do, I'll send off for a quote and post on here. I can also program the PIC as well.
Another thing I may look at doing is organising CNC machined aluminium housings like the McLaren unit - again.. if there is enough interest.
Hoops
I may look into doing a run of PCB's if we can get enough interest (and assuming it is OK with the XR team..)
I have searched for the gerber files, but haven't found them as yet - once I do, I'll send off for a quote and post on here. I can also program the PIC as well.
Another thing I may look at doing is organising CNC machined aluminium housings like the McLaren unit - again.. if there is enough interest.
Hoops
- Nye
- Primera conducción sin ayudas
- Mensajes: 398
- Registrado: 16 Dic 2008 01:00
- Volante: G25
- Ubicación: Sabadell
- Contactar:
Re: DisplayXR - English Forum. Type here your posts.
viewtopic.php?p=49845#p49845
Follow this link and click on the second 'muestra' button.
The link to the gerber files is found at the bottom. A bit tricky
Follow this link and click on the second 'muestra' button.
The link to the gerber files is found at the bottom. A bit tricky
- crobol
- Maestro al volante
- Mensajes: 13867
- Registrado: 28 Abr 2007 00:00
- Volante: DFP
- Ubicación: BCN
- Contactar:
Re: DisplayXR - English Forum. Type here your posts.
Read the Creative Commons License. ThanksNye escribió:viewtopic.php?p=49845#p49845
Follow this link and .......