Corvette C6 ZR1 2012 BETA

Solamente mods relacionados con el Simulador.

Moderador: XRStaff

Responder
anxuno
Espectador
Espectador
Mensajes: 2
Registrado: 27 May 2011 00:48
Volante: G25

Corvette C6 ZR1 2012 BETA

Mensaje por anxuno »

http://www.virtualr.net/chevrolet-corve ... a-released

Me extraña que no este publicado.

Esta probado y la verdad creo que es de lo mejorcito que probe en rFactor. He de decir que el FF se me parece muchisimo al LFS, que despues de iRacing es lo mejor.

Probarlo porque merece mucho la pena
Avatar de Usuario
Osasunista
Poleman
Poleman
Mensajes: 2052
Registrado: 22 Ene 2011 16:05

Re: Corvette C6 ZR1 2012 BETA

Mensaje por Osasunista »

Es la primera vez que veo un mod en el que viene incluida toda una instalación de rFactor. ¿hasta qué punto es eso legal? Espero que al menos los ejecutables sean los originales. 8O
Donante PREMIUM EXTRA PLUS PRIMERA PRENSADA
Avatar de Usuario
crobol
Maestro al volante
Maestro al volante
Mensajes: 13867
Registrado: 28 Abr 2007 00:00
Volante: DFP
Ubicación: BCN
Contactar:

Re: Corvette C6 ZR1 2012 BETA

Mensaje por crobol »

Why a full rFactor installation?

Rfactor is very flexible but that makes it prone to being badly setup. We provide a full installation so you get the plugins and settings we feel are the best. These are (most) of the things we did:
- Latest RealFeel plugin with pre-configured ini file
- Grinding Tranny mod for realistic gear shifting, available as car upgrade
- Optimize PLR file (sound settings, removed view shake, few other bits and bobs)
- Optimize Controller.ini for full RealFeel force feedback, no fake effects
- D3D9.dll for improved framerates on most systems
Without Vsync, the best way to remove most image tearing is to run rFactor at a frame rate that is a multiple of the screen refresh rate. Most monitors are 60hz, so you would fix rFactor at 60fps. However, plugins (RealFeel etc.) work best above 90fps, and input lag is further reduced if your pc is fast enough to do 120fps. Press control+f to see you framerate. If this occasionally drops below 120, lower details or resolution. If you still can’t get a steady 120, the last step is to open the PLR file and change the “Max Framerate=”-120” to -60. If your pc can’t do 60fps, it is time for an upgrade!
En el Readme lo explican y parece que es muy importante leer el PDF con las instrucciones.

Es una Beta solo publicada para recibir feedback.
Responder