Nuevo Racer 0.60 - 0.61 - 0.70

El Simulador de Codigo Abierto.

Moderador: XRStaff

Responder
Avatar de Usuario
The_Master
Aprendiendo a trazar
Aprendiendo a trazar
Mensajes: 211
Registrado: 11 Nov 2006 01:00
Volante: Logitech G25
Ubicación: Valladolid
Contactar:

Nuevo Racer 0.60 - 0.61 - 0.70

Mensaje por The_Master »

Ha salido un nuevo racer, han mejorado las FPS y nordschleife al fin me funciona! :D os dejo el post en inglés de RSC

Finally another version...

Get it at http://www.racer.nl/dl_beta_win.htm

The changes below, enjoy!
Ruud

- Modified engine sound mix; now, it's always a mix between acc/dec sounds. This does mean that the sound
is always loud unless you downmix the decelerate_* audio trees in car.ini. The mix is based
on engine output (more 'acc' sound if the engine torque reaches its max_torque)
- The engine scales its internal lookup-table to get a valid 'maxTorque' reading in debug output Ctrl-8
(needed this for the audio mix above).
- LOD for tracks didn't work. It now does, only LOD definition has changed somehwat; lod_out has disappeared (!).
To improve Swiss-Stroll for example, search & replace lod_out with lod0_z (in geometry.ini, gives about 20% fps increase here).
Check http://www.racer.nl/tutorial/lod.htm for the latest definition.
- renderer.min_detail and max_detail set to 1.0. It was 0.3..3.0, which normally made visibility increase by 3x.
- Sky objects could be flipping on & off due to the wrong far-plane culling being used. Now, sky objects
are NOT culled at all (so more expensive and non-optimal but it seems ok).
- quickstart=1 works again
- The fader was always painted; fps should be a bit higher now.
- Scenegraph animation was a bit optimized. FPS increase is hard to notice though.
- ODE has always been compiled with asserts, ouch. Didn't seem to make a different in fps though.
- Defaults for racer.ini's renderer.max_detail and min_detail were 2 and 0.1, now both 1.0
- Added a flywheel special effect to the engine sound; upon shifts, some jitter is added to the engine frequency.
- Start lights image could appear offset when quickstart=1
- Added 3D lights support for start sequence; see http://www.racer.nl/tutorial/newtrack.htm#startlights for details.
- Special.ini's gfx.fog.mode was never read. Fog always used GL_EXP fog.
- Projected shadow is now off for the focus car if no car model is shown (model=2 in car.ini)
- Added mirrors.simple.x/y to be able to place the mirror
- Added min/max FPS tracking (in the profile debug view, Ctrl-6). Is reset when toggling FPS on/off (Ctrl-F).
- Added menu.wait to potentially make the menu a bit more CPU friendly
- Current car's engine sounds are 2D when inside the car, 3D when outside (track view for example)
- Added mirrors.texture.offset and texture.angle to be able to modify the mirror direction.
- Added stats.flag_pos for the racing flag position
- Fog was modified to NOT use the GL_NV_fog_distance OpenGL extension; funny fog on very large polygons could occur (inverted).
- Bugfix in Modeler when exporting WRL's when the original did not have a texture assigned to a material.
- Added support for fullscreen Cg shaders (see http://www.racer.nl/tutorial/howto_f...en_shaders.htm) like sepia, bloom etc.
- Fullscreen (FBO) shaders support anti-aliasing on cards that have extension GL_EXT_frame_blit (nVidia 8xxx series and up) through
racer.ini's renderer.motion_blur.samples (set to 1/2/4/8/16 samples for example, depending on your card's maximum AA)
- Added 'motionblur method <n>' and 'motionblur blur_alpha <f>' commands (see http://www.racer.nl/reference/scripting.htm).
- Multiplayer car requests are handled very differently from previous versions. This was targeted at LAN games, not sure how it'll work on the internet.

Known problems: turning on motion_blur method 4 gives funny projected car shadows (no stencil buffer yet)



///////////////////////////

Racer 061

A few patches for v0.6.0...

Get it at http://www.racer.nl/download/racer061.zip

Changes:
- Fixed 'too many network adapters' crashes
- Fixed smoke animation in replays
- Set shaders.enable=1 in distribution (accidentally at 0 in the previous release)
- Modified road noise amplitude; v0.6 switched to Simplex noise (not Perlin) and that was faster in frequency
- Added stats.show_wrong_direction setting to be able to turn off the wrong-direction indicator.
- Added stats.max_race_view to limit all the stat views that F1 loops through (not all are useful)
- Added Cg compile errors to QLOG.txt when a shader fails to compile
- Added car engine jitter parameters (see http://www.racer.nl/reference/carphys.htm#enginejitter) to control engine jitter when shifting
- Engine acc/dec mix slightly modified; it was pure throttle application, now accVol=throttle+0.2-brakes (limited to 0..1) (decVol=1-acc)
- Added dbg_car.simple_susp_live_rate_slope; when implicitly integrating the wheel position, the suspension rate slope was calculated incorrected.
Set to 1 for backwards compatible suspension physics, 0 for more realistic damping (used only when dbg_car.susp_implicit_integration=1)
- Added dbg_car.damp_vertical_velocity_reversal. Set to 1 for dampening wheel velocity reversal (sign change).
Perhaps more stable with hard dampers. Default=0 for backwards compatibility.
- Improved error messages when ini files have mismatching brackets ({ and }) (detection, line numbers)
- Track special.ini's gfx.clear_color has been made obsolete. It will always be 1 (no speed increase detected)
- Racer.ini had timing.slomo set to 10. Now set to 0 to give more fps.
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Pues ya sabes.... cuando quieras nos damos unas vueltas por nurburging.
Saludos!!!!!!
Avatar de Usuario
The_Master
Aprendiendo a trazar
Aprendiendo a trazar
Mensajes: 211
Registrado: 11 Nov 2006 01:00
Volante: Logitech G25
Ubicación: Valladolid
Contactar:

Mensaje por The_Master »

yo encantado, si quieres agregame al msn para quedar y eso: luis_cobo85@hotmail.com
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Nueva versión 0.62 Racer v0.62

ESTA VIVO, EL RACER ESTA VIVO!!!!!!!!! xddd
Saludos!!!!!!
Avatar de Usuario
crobol
Maestro al volante
Maestro al volante
Mensajes: 13867
Registrado: 28 Abr 2007 00:00
Volante: DFP
Ubicación: BCN
Contactar:

Mensaje por crobol »

Gracias a los 2 por mantener en vida el foro del Racer....
Seguid posteando todas las novedades que vayáis encontrando.

Un Saludo.
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

crobol escribió:Gracias a los 2 por mantener en vida el foro del Racer....
Seguid posteando todas las novedades que vayáis encontrando.

Un Saludo.

De nada hombre. Tenía pensado cuando termine un video del RoR montar una especie de Random pero con el Racer usando como server mi pc. Un día de estos testearemos The_Master y yo el online y si sale bien intentare organizarlo.
Saludos!!!!!!!
Avatar de Usuario
The_Master
Aprendiendo a trazar
Aprendiendo a trazar
Mensajes: 211
Registrado: 11 Nov 2006 01:00
Volante: Logitech G25
Ubicación: Valladolid
Contactar:

Mensaje por The_Master »

que es un random? :oops:
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Una especie de carrera "amistosa"

Saludos!!!
Avatar de Usuario
The_Master
Aprendiendo a trazar
Aprendiendo a trazar
Mensajes: 211
Registrado: 11 Nov 2006 01:00
Volante: Logitech G25
Ubicación: Valladolid
Contactar:

Mensaje por The_Master »

:D
matute_87

Mensaje por matute_87 »

jo parece que vuelve con todo el racer
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Aunque parezca increible nueva versión corrigiendo muchos bug y añadiendo nuevas caracteristicas.
Racer 0.63

Saludos!!!!!
Ibiza

Mensaje por Ibiza »

pues vosotros no sé, pero yo con cada versión nueva que sale se me jode algo :|
como con esas viejas betas no me a ido ninguno, aunque claro, tampoco tengo un ordenador preparado para jugar...
Avatar de Usuario
The_Master
Aprendiendo a trazar
Aprendiendo a trazar
Mensajes: 211
Registrado: 11 Nov 2006 01:00
Volante: Logitech G25
Ubicación: Valladolid
Contactar:

Mensaje por The_Master »

Ibiza escribió:pues vosotros no sé, pero yo con cada versión nueva que sale se me jode algo :|
como con esas viejas betas no me a ido ninguno, aunque claro, tampoco tengo un ordenador preparado para jugar...
a mi cada vez me va mejor
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Nueva versión, que incluye Cg Shaders que no se lo que son pero lo voy comprobar en un momento :P :P

:descarga: Racer 0.64c :descarga:

Saludos!!!
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Vale primero antes de nada una recomendación: poneros babero :dribble: :dribble:

Ahora viene lo bueno. El cambio es el siguiente. Hemos pasado de este asfalto:

Imagen

A este:


Imagen

Imagen

Imagen

A que mola??

Saludos!!!
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Nueva versión del racer. Está es la 0.70 con nuevos efectos de iluminación y corrección de algunos bugs.
:descarga: Racer 0.70
Además necesitais esto: :descarga: http://www.racer.nl/download/vcredist_x86_vc2008sp1.exe

Imagen

Saludos!!!
leamaster

Mensaje por leamaster »

Con la version 0.7.0 me desaparecieron todas las agujas del tablero dentro del auto :S

Como lo arreglo??

Miren:

[img]http://i39.tinypic.com/sgljxh.jpg[/img]

[img]http://i43.tinypic.com/w8ajkg.jpg[/img]
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Pues no lo se. A mi también me pasa. Solución: volver a la 0.64c

Saludos!!
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Bueno me he descuidado un par de semanas y se me ha venido el mundo racer enima :oops: :oops: Ha sacado a la luz tres versiones nuevas tras la 0.70. La 0.71, 0.72 y la que os presento 0.73. Todavía no la he probado, en cuanto la pruebe os pongo capturas.
:descarga: Racer 0.73

Saludos!!!
Avatar de Usuario
Agus
Colaborador RoR
Colaborador RoR
Mensajes: 3056
Registrado: 28 Sep 2007 00:00
Volante: Logitech G25
Ubicación: Navalvillar de Pela
Contactar:

Mensaje por Agus »

Bueno os dejo unas capturillas. Por cierto, ya esta solucionado el problema del cuadro de instrumentos.

Imagen

Imagen

Imagen

Imagen

Saludos!!
Avatar de Usuario
The_Master
Aprendiendo a trazar
Aprendiendo a trazar
Mensajes: 211
Registrado: 11 Nov 2006 01:00
Volante: Logitech G25
Ubicación: Valladolid
Contactar:

Mensaje por The_Master »

pues yo me he descuidado alguna semana mas que tu :oops: ahora msimo me bjao la nueva version
Responder